ISO11925-2-2010建筑材料的燃燒性能試驗第2部分:直接火焰作用下的點燃性 :
Reaction to fire tests — Ignitability of products subjected to direct impingement of flame —
Part 2: Single-flame source test
ISO11925的本部分規定的測試是在沒有外加輻射的條件下,使用小火焰直接沖擊垂直放置的試樣以確定產品的可燃性的試驗方法。
測試方法的詳細信息見附錄A.
適用范圍包括建筑材料的成品、元件和部件。
其對應國家標準GB8626-2007 《建筑材料可燃性試驗方法》
對應產品 JCK-2型建材可燃性試驗爐
Contents Page
Foreword ........................................................................................ iv
Introduction......................................................................................v
1Scope ................................................................................................. 1
2Normative references......................................................................1
3Terms and definitions ..................................................................... 2
4 Test apparatus ............................................................................... 2
5 Test specimen.................................................................................. 4
5.1Preparation............................................................................ 4
5.2Dimensions .................................................................................... 4
5.3 Products which are not essentially flat................................................ 4
5.4 Number of specimens ......................................................... 4
5.5Substrates ................................................................................... 5
6 Conditioning ............................................................................. 5
7 Test procedure............................................................................... 5
7.1General ............................................................................... 5
7.2 Preliminary operations...........................................................................5
7.3Testing operations ........................................................................................... 6
7.4 Duration of test .............................................................. 7
8 Expression of results ................................................... 7
9 Test report ............................................................................ 7
Annex A (informative) Precision of test method....................................... 23
Bibliography......................................................................................... 26
厚度超過10mm的多層樣品的標準式樣架
標準建議的火焰高度測量裝置
燃燒器圖紙
由于內容占用空間較大,此處不提供原文下載,有關ISO11925-2-2010Reaction to fire tests — Ignitability of products subjected to direct impingement of flame —-signed的詳細內容,可聯系炯雷相關人員索取。